Needle looms second-hand | Used needle punching machines | Needlepunch | Needle felt and felting machines up to 3.000 mm working width
1 pc. needle felt machine ASSELIN A50 XFRS-SD2
(Ref. No. 2156159).
2900 mm working width, year of construction 2006, second-hand
The needle direction is from top to bottom.
Includes 3 sets of needle boards, 324 mm needle board width,
4560 needles/m in the first board and 7000 needles/m in the
second board.
Max. 1200 strokes/min, 60 mm stroke height.
Speed 20 m/min. The machine has been used for
approx. 34000 hours at present.
The scope of supply includes a blowing section
as well as suction possibility.
1 pc. needle loom FEHRER NL 21 (Ref. No. 2155979)
2420 mm working width, year of construction 1979, second-hand
needling from top to bottom.
1200 strokes per minute, stroke height 40 mm.
Number of needles = 10.000 per meter.
Stripper plate and penetration depth of needles infinitely
variable adjustable.
Speed 1 to 10 m/min.
Machine weight approx. 8500 kg.
Including switch board and sound absorbing cabin, ready to use.
1 pc. turning table HEUER (Ref. No. 2155904)
3000 mm working width, year of construction 1992, used
90 ° with cloth feeding
1 pc. needle punch machine ASSELIN (Ref. No. 2155825)
2200 mm working width, year of construction 1984, second-hand
downstroke machine, approx. 900 to 1000 rpm, 4000 needles per meter
1 pc. needle loom ASSELIN (Ref. No. 2155826)
2600 mm working width, year of construction 1986, used
Upstroke machine, needling from bottom to top.
600 strokes/minute, 2800 needles/meter
1 pc. laboratory needle loom / sample needle loom HUNTER
(Ref. No. 2153687)
12 inches working width, year of construction unfortunately not known
with one needle board
motor 440 V / 60 cycles, 3 phases
machine ready to work
one side cover is missing.
1 pc. needle punch machine AUTOMATEX AG-60 (Ref. No. 2155549)
2700 mm working width, year of construction 1992, second-hand
top and bottom punch, approx. 2250 mm fabric output
very dependable machine, has some oil leaking (shafts)
operating width listed as 2.600 mt
2 boards up and down / 8400 needles per board
Listed at 6000 needles per lin meter
2 extra sets of spare needleboards
Rated at 1250 strokes/minute, running at 1000 strokes in the factory
Can use 3" or 3.5" needles
Updated operator safety devices
No infeed
Cooling unit available (for hot climate operation)
Dimensions listed: 4.62m wide, height 2.25m, + motor 2.77m, 1.1m deep
14 tons, 51 KW
Previously used to produce needlepunch polyester and polyprop
Weight range 150g - 1000g g/sqm
Thickness: 2 - 12mm
Machine is on the floor, but not connected to power.
1 pc. needle loom DILO (Ref. No. 2155127)
2500 mm working width, second-hand.
1 pc. spare part package for DILO OD-I-SCM-30 (Ref. No. 8324814).
2 pcs. Disco gears LENZE type 117020416 (Ref. No. 8324205)
P1 = 0,75 KW n1= 1500 min-1
M2 = 93 - 186 NM
n2 = 61 - 10,6 min-1
suitable f.e. for needle loom DILO OUG-II made in the 80s.
1 pc. needle loom DOA 1140-2500 (Ref. No. 2152244)
2500 mm working width, year of construction 1970
relatively low number of working hours
1.430 needles/m, including 7 pcs. second-hand needle boards
rolls of needle board holders renewed in 2003.
Needle looms and needle punching machines wider than 3.000 mm width
Cylinder needle machines and drum tacker (cylinder needle punch)
Structuring needle looms for velour and design, patterning looms
Needle looms and needle felt machines for special application
Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand needle looms, needle punching machines, needle felt and felting machines.
