Further second-hand textile machinery and pre-owned equipment / occasion textile machines we have available for sale regularly
Further second hand
textile machines / Weitere
gebrauchte Textilmaschinen
Used textile machinery / Used
textile machines
1 pc. pleating machine RABOFSKY R 188 (Ref. No. 8302951)
With Infrared Dryer DRIQUIK
made by Dry-Clime Lamp Cop. USA
1 pc. Mixmaster (Ref. No. 1133292)
1 pc. punching machine SANDT (Ref. No. 5202350)
1 pc. 5-roller-calander KOMATEX (Ref. No. 711905-N)
1 pc. conveyor system for finished goods (Ref. No. 519907-N)
1 pc. moulding press OTT (Ref. No. 5202259)
1 pc. carding machine FOR (Ref. No. 2133335)
1 pc. hydraulic cutting press SCHÖN (Ref. No. 5202557)
1 pc. printing line (Ref. No. 7173239)
1. Entry with Jbox storing system to allow non-stop sewing of the rolls,
2. Automatic speed control group and tension control device,
3. Brush for surface cleaning,
4. Pulling group before the entry on the printing carpet, with piece speed
and tension control system. Equipped with automatic fabric, with photocell
and equalizer.,
5. Printing carpet brand Meccanotessile, with three heads for serigraphic
cylinder print at three colours, predisposed for mounting other three
heads,
6. Stenter Frame S.LUCIA , handy working width 3200 mm. Entry sector with
Infragas board for pre-heating. Dying oven of 9 mt, composed by three
sectors, with two gas burning systems and two ventilators for warm air
recycling each.,
7. Two fumes aspiration cowls, in entry and exit, and one exhaustor assure
evacuation of damp air and fumes.,
8. Double accumulation storing system which allows the non-stop trolleys
change. The store has its own automatic balancing device in exit .,
9. Longitudinal cutting group composed of 16 cutting heads, to get a wide
range of rolls width in exit.
10. Rolling up group for big rolls on bypass trolley, which allows the
saving of trimmed edges . A rolling up tension control device included.
14 pcs. single knife cutting machines (velvet cutting machine) (Ref. No.
514601-N)
made by Franz MÜLLER, type QL3
1 pc. cutting line PASQUATO (Italian Brand) (Ref. No. 5143241)
machine suitable to cut TNT or textile materials from rolls to sheets
1 pc. weaving machine SAURER S 400 Terrymatic (Ref. No. 4132651)
accessories:
2 warp beams,
2 cloth beams,
4 weft feeders,
spare parts
dobby STÄUBLI,
Jacquard GROSSE Unirapid II, made in 1992
1 pc. case packer (Ref. No. 5192817)
suitable to pack flow packs in paper boxes at a quantity of 6, 8, 12, 16
or other quantity or displays
1 pc. bridge punching press SANDT (Ref. No. 5202231)
1 pc. tension tester ZWICK 1425 (Ref. No. 5232434)
1 pc. edge trim cutter (film) ITALIAN BRAND (Ref. No. 1113172), suitable for PE and PP
1 pc. slitter/rewinder CAMERON (Ref. No. 5142445)
1 pc. band scale TACHO BERKEL GmbH (Ref. No. 5223323)
3 pcs. multiaxial system creels (Ref. No. 5163319)
1 pc. picker HOLLINGSWORTH WM 500 (Ref. No. 1123320)
1 pc. dryer (Ref. No. 7133030)
1 pc. winder CELLI (Ref. No. 5112538)
2 pcs. weaving machines SULZER 130" 105E10D1 (Ref. No. 4113311)
1 pc. tearing machine (Ref. No. 1113293)
1 pc. laboratory calander (Ref. No. 7111260)
1 pc. tight bander MEURER CM/58 M 60 (Ref. No. 5191248)
1 pc. special folding section (Scott-F-Fold) HOBEMA 140C (Ref. No.
2302793)
1 pc. single fold interfolder (head) BRETTING 3922-88 (Ref. No.
2302794)
1 pc. calander PERINI (Ref. No. 7111297), steel/steel
3 pcs. inkjet printers for packing DOMINO (Ref. No. 7173261)
1 pc. coating and flocking line COATEMA (Ref. No. 7142840)
1 pc. unwinding station FEHRER (Ref. No. 5113322)
2 pcs. weaving looms STARLINGER type LENO (Ref. No. 4123170) for ajour bags and net
bags
12 pcs. weaving looms STARLINGER type HDN (Ref. No. 4123171),
suitable for woven bags
1 pc. foaming machine HANSA (Ref. No. 7143238)
suitable for very low density foams,
both neutral and coloured,
gel/non-gel type
1 pc. nonwoven Line with calander TEMAFA / HERGETH / KÜSTERS (Ref. No.
2113387)
suitable for coverstock and similar materials,
consisting of:
2 pcs. Mixmasters TEMAFA,
2 pcs. fine openers HERGETH MTO,
2 pcs. HERGETH Masterchutes MC/W,
2 pcs. carding machines HERGETH,
1 pc. calander KÜSTERS,
1 pc. winder EDELMANN
1 pc. spraying chamber for double sided spraying (Ref. No. 7142670)
(suction) incl. filter unit and recovery unit for bonding agent
15 pcs. punching machines, in detail as follows: (Ref. No. 5202770)
3 pcs. machines made by MAQUINAS KLEIN from BRAZIL
12 pcs. machines made by USM Kontaktstanzen GERMANY
1 pc. feed system TECHNOPLANTS (Ref. No. 2303244)
1 pc. needle loom FEHRER NL 42 (Ref. No. 2163198)
1 pc. cutting section for nonwoven lines (Ref. No. 5142672)
- longit. and cross cutting unit with meter counter and delivery of ready
sheets to lifting table
- edge trim openers WISE
- manual pressing station for recycled fibers incl. sealing station for
Polyethylene foil
1 pc. cutting machine KAMPF Universal 5F/GL (Ref. No. 5142928)
incl. SIMCO electrostatic web cleaner,
rewinder = contact arm winder
1 pc. folding and cutting table for surgical product PUETZ (Ref. No.
5142924)
Product basis : non woven spunbond or similar used in surgical block
1 pc. perforation machine WERNER AUGUSTIN NAEHTECHNIK GERMANY
type A-N 200 (Ref. No. 5143125),
suitable for perforation of strips of nonwoven materials
1 pc. compensator and winder PARKINSON / MENZEL (Ref. No. 5112237)
automatic Batcher with 3 rolls ans several knives
1 pc. automatic packing line LEIBFRIED (Ref. No. 5191680)
suitable for packing of diapers, wipers etc.,
with shrinking tunnel 3.000 mm length
1 pc. beam cutting press SAMCO / USM TC 115 (Ref. No. 5202402)
1 pc. cutting table BULLMERWERK G.O. STUMPF GMBG type Komet II (Ref. No.
5143065)
1 pc. pump for waterjet cutting machine INGERSOL RAND (Ref. No. 5132983)
7 pcs. PERFECTA cutting machines (Ref. No. 514489-N)
1 pc. cutting table BULLMERWERK G.O. STUMPF GMBH type ESV 25 (Ref. No.
5143066)
5 pcs. intermediate chutes FS 5 1000 (Ref. No. 1122122)
1 pc. Sperry Rand hydraulic drive for "A" frames (Ref. No.
5112810)
1 pc. hopper feeder (Ref. No. 1142948)
1 pc. web drafter ASSELIN (Ref. No. 2303018)
1 lot A-frames (Ref. No. 5113222),
with center drive for center winding
1 pc. needle loom FEHRER NL 21 RS (Ref. No. 2153256),
upstroke machine
1 pc. needle loom FEHRER NL 21 S (Ref. No. 2153252),
down stroke
1 pc. nonwoven Thermobonding Line FLEISSNER (Ref. No. 2122267)
1 pc. quilting machine HAUSER SNA/K (Ref. No. 5152801),
single needle straight stitch machine
1 pc. quilting machine STUTZNAECKER MAMMUT E7 5 SL (Ref. No. 5153023)
single needle machine with frame (turning frame),
Zig-Zag or straight stitch
1 pc. nonwoven line for glass fibers (Ref. No. 2122918)
- creel for glass fiber bobbins of 500 mm diameter,
- band for lay down of fibers
- needle loom FEHRER,
- cutter for dividing the material after the needle loom
- 2 MENZEL spreaders for precise lay down of the two lines of material
1 pc. nonwoven Line for cotton wadding SPINNBAU (Ref. No. 2122657)
with carding machine, hopper feeder, chute feeder,
1 Tambour Line CORSI VINCENTO Prato Italy
3 pcs. pipe switches for fibre transport system (Ref. No. 2302255)
1 pc. cross lapper HERGETH F 671 (Ref. No. 2143352)
1 pc. drum suction dryer (air through dryer) HONEYCOMB (Ref. No.
7132288)
1 pc. vertical pin stenter PROTER DALGLIESH (Ref. No. 7121466)
1 pc. paste dot coating line CARATSCH (Ref. No. 7142238)
electronic sensor at entry,
impregnation,
electronic sensor control for volume of the paste,
dryer, compensator, winder
1 pc. oven GEORG KOCH + SONS (Ref. No. 7132671)
1 belt, 5 chambers, with sprinkler and water spray fire-extinguishing
installation
for thermoplastic bonding agents,
with cooling zone, 2 belts (bottom and top)
4 pcs. carding machines TRUTZSCHLER DK 715 (Ref. No. 2133132)
1 pc. Boiler CLEAVER BROOKS Model CB 700-300 (Ref. No. 7133056)
1 pc. carpet back coating line CAMPEN (Ref. No. 7142576)
1 pc. needle loom HUNTER (Ref. No. 2162612) single board down punch
1 pc. pre opener LAROCHE 2342 (Ref. No. 1122408)
1 pc. compact card D + F (Ref. No. 2132391)
1 pc. used needle punch machine DILO NFZ 25 (Ref. No. 2153124)
1 pc. needle loom (Ref. No. 2312158),
capacity 2500 to 3500 shoulder pads per hour
1 pc. Maliwatt Machine Malimo type Maliwatt 14012 (Ref. No. 5163127)
1 pc. hot oil calander (Ref. No. 7112808),
"CHROMOLOX" heating the oil up to 600 degrees F
1 pc. 2-roller Foulard KÜSTERS type 222.17 (Ref. No. 7111208)
1 pc. HT beam dyeing machine SCHOLL HSU-13/900/160 (Ref. No. 717362-N)
1 pc. hank dyeing machine MCS Pandora BT 300 (Ref. No. 321366-N)
1 pc. winch THEN (Ref. No. 722368-N)
1 pc. Laying Table / Cutting Table INVESTRONICA (Ref. No. 8302783), CHALLENGER SC 320
1 pc. laying machine MAAG type L3-HS (Ref. No. 8302795)
1 pc. paste dot machine CARATSCH type COM 8922 (Ref. No. 7143126)
1 pc. production line for PVC paste deposit (Ref. No. 7143120)
for carpet and door-mats
1 complete airjet weaving line (Ref. No. 4142848),
16 pcs. SULZER L5100 8 shafts,
4 pcs. SULZER L5100 16 shafts,
13 pcs. SULZER L5001 12 shafts,
11 pcs. SULZER L5001 16 shafts
1 pc. complete printing line, consisting of: (Ref. No. 717348-N)
- material entry, unwinder + 3-roller-foulard,
- printing machine ZIMMER Magnoroll,
- dryer ARTOS,
- 1 washing device for template ZIMMER,
- 1 sample printing machine ZIMMER
5 pcs. blending bale openers HERGETH-HOLLINGSWORTH type HF
6.012 (Ref. No. 1123187)
The machines are with scale / weighning system, suction, funnel feeding,
adjustable individually
by electro-pneumatically valve, with cyclone for waste press, SPS control
1 pc. Non-Woven Line, consisting of: (Ref. No. 2123214)
5 pcs. load bale openers BONINO
2 cards HERGETH,
HERGETH fiber preparation for single cards (double preparation)
PERFOJET belts solution (3 big pumps) ~ 4 injectors x pump
for plain products, perforated products, hydroembossed products on belt
(geometric design)
(It is possible to buy a single cylinder unit for hydroembossing product
as well (animals, flowers),
FLEISSNER dryer,
CELLI winder,
Measurement device for humidity and weight, electronic system,
TV Camera,
Filtration for PERFOJET: Cartriage and bags
1 pc. thermobonding calander RAMISCH PK 450 (Ref. No. 7112404)
with 4 rolls (cotton/engraving steel/ flat steel / cotton)
1 pc. drawing frame RIETER RSB 951 (Ref. No. 3142556)
3 over 3 drawing device, regulation, sliver monitor, autom. can change,
can size 440 x 1070
1 pc. nonwoven production plant (Ref. No. 2111012)
1 pc. soft batting line (Ref. No. 2112540),
consisting of:
- D+F picker,
- feedbox,
- double cylinder garnett single doffer,
- almost new 72" horizontal cross lapper,
- floor apron 100" with folding and cutting over 90",
- with 3 sets of cutting knives on a hard roll
1 pc. needle punch line (Ref. No. 2112539)
consisting of:
- blending line,
- fine opener - condensor,
- feedbox,
- D+F double cylinder carding machine,
- 100" wide horizontal cross lapper,
- floor apron 174" width,
- pre needler P+S
- needle loom FEHRER NL 21, 3,5" stroke,
- with inspection wind up with 7 air cutting knives and
autom. cross cutter
1 pc. impregnation machine for latex impregnation AMDES / FLEISSNER (Ref.
No. 7142562)
suitable for needle punch nonwovens, with dryer
1 pc. nonwoven line to produce jute felt (Ref. No. 2113049),
including two needle looms BYWATER
as well as accessories like tearing willow, needle boards etc.
1 pc. coating unit AMDES / STORK with CT IV Attachment (Ref. No. 7142680)
1 pc. blending line LAROCHE (Ref. No. 1132681), 4 weighing feeders,
roller opener, 1 picker
1 pc. inspection machine SELF-MADE (Ref. No. 5172679)
suitable for floor finishings and carpets,
consisting of: nwinder, conveyor, transversal cutting, winder, table,
addit. equipment
1 pc. CMR carpet weaving loom VAN DE WIELE (Ref. No. 4163367)
single rapier, with wool creel,
The loom has a maximum reed density of 373, 8 colours,
presently installed is a reed density of 340, 8 colours.,
Equiped with 3 PTR Jacquards of 4080 solenoids each.,
Installed with a high beem chair.,
Optional: PTX Jacquard of 4480 solenoides
1 pc. shortening and cleaning unit for hemp fibers H.-I. PALLMANN
INNIVATION IPHS 1500x1000
1 pc. calander KÜSTERS (Ref. No. 7112571)
2 engraved rollers,
with bombage (no s-roller-system)
3 pcs. cleaners HERGETH Step-Cleaner (Ref. No. 1302378)
1 pc. Lintcleaner HORN SUPER 86 (Ref. No. 1122551)
1 pc. bale opener TRUETZSCHLER (Ref. No. 1123133)
various connection valves for fibre transport (Ref. No. 1132310)
1 pc. filter unit (Ref. No. 1132978)
2 pcs. openers HERGETH (Ref. No. 1122552)
3 pcs. bale openers HERGETH (Ref. No. 1122381)
1 pc. blending fiber opening HERGETH A 9 K (Ref. No. 1123135)
1 pc. blending bale opener HERGETH HF/W (Ref. No. 1123134)
1 pc. small tearing machine TRUTZSCHLER (Ref. No. 1112979)
1 pc. stenter frame BRÜCKNER VN (Ref. No. 7122787)
1 pc. needle loom FEHRER NL 9 / SRS (Ref. No. 2162660)
entry frame with small trough, foulard KÜSTERS 222-52-1800,
line control with expanders
weft straightener MAHLO RFMC-94H11,
tower washer MENZEL,
steaming box, exit air humidity control, with E + L tension control,
exit with winder, center winder and spreader
1 pc. cloth shearing machine MENSCHNER 3/K (Ref. No. 5241978)
1 pc. shearing machine for fabrics with 1 cylinder (Ref. No. 524300-N)
made by RAXHON S:A.
2 pcs. inspection machines SELF-MADE (Ref. No. 517973-N), incl. winder and meter counter
1 pc. closing machine for duvet covers ARBTER BBN 12 (Ref. No. 8303108)
1 pc. winding machine GILBOS AW 10 (Ref. No. 3193333)
1 pc. zig-zag sample punching machine (Ref. No. 5203177)
1 pc. hank washing machine MCS WR 10 (Ref. No. 7223038)
1 pc. HT beam dyeing machine (Ref. No. 7232780), 2000 mm working width
1 pc. raschel machine KARL MAYER RS 4 N-F/LW (Ref. No. 8142440)
1 pc. baling press AUSTRO PRESSEN type APK 25 (Ref. No. 1153354)
1 pc. unwinding station MDS (Ref. No. 5113154)
1 pc. stenter frame MONTEX 5F Twin Air (Ref. No. 7122934)
1 pc. recycling line EREMA RGA 80 TE (Ref. No. 1112916),
consisting of:
1 pc. conveyor FB 6000/900, 1 pc. sound absorbing tunnel,
1 pc. metal detector DLS with double spool divisible,
1 pc. RM-combination RM 80 TE, 1 pc. timer for pre heating the line,
6 pcs. special HM-knives, 1 pc. shock sensor swivel blade,
1 pc. control system for pre compaction, 1 pc. lubricant pressure
measuring device,
1 pc. lubricant temperature control,
1 pc. sieve changer SW 4/104 RTF with partial return cleaning system,
1 pc. mechanic 2-way lubricant valve incl. adaptors
Granulate unit consisting of: 1 pc. cooling zone special conveyor 7000/600, 1
pc. cutting mill type SML
30/50-S3-1,
Hot beater granulate unit consisting of:,
1 pc. hot beater granulate device HG 120, 1 pc. granulate draining sieve
GS 1500,
1 pc. heat exchanger, 1 pc. water temperature control valve for GS 500,
1 pc. granulate centrifugal oven GZ 350, 1 pc. injector conveyor blower
IFG 20
20 meter pipes, 1 pc. cyclone-silo-combination,
1 pc. sound absorbing package complete for RGA
1 pc. tufting machine COBBLE (Ref. No. 6133255)
1/8" gauge COC,
straight needle bar,
patterning device: CAM drive, diameter 16"
with cloth unwinding and inspection and creel,
Loopers / Knives Semi Module System
Yarn tension control SICK
1 pc. carpet weaving loom VAN DE WIELE MV (Ref. No. 4161733)
wire wilton loom with Vincenzi Pitch Jacquards, with creels for two frames,
warp beams
1 pc. velour needle loom FEHRER NL 21 SRV (Ref. No. 2212509)
1 pc. cross cutting machine JOSTING FS 1500 (Ref. No. 5143321)
1 pc. foam mixer HANSA (Ref. No. 7141600)
6 pcs. winders SAHM type 260 E (Ref. No. 3191347)
2 pcs. tearing machines RIETER (Ref. No. 1111159)
1 pc. needle loom AUTOMATEX (Ref. No. 2153085)
4 pcs. crimpers NEUMAG (Ref. No. 3233082)
1 pc. Steam Bloc WANSON type 200 (Ref. No. 7223081)
2 pcs. BCF lines - PP/BCF carpet yarn line BARMAG / HILLS (Ref. No.
3233072)
1 pc. nonwoven Heat Bonding Machine (Thermoplast nonwoven Calander)
ROBERTO PAPINI THERMOPLAST 954 (Ref. No. 7113083), Heating by infrared
1 pc. automatic bale press PAAL type PACOMAT 4 (Ref. No. 1153084)
1 pc. airlay carding line FEHRER V 21 K 12 (Ref. No. 2133009)
1 pc. fiber / carpet waste line SCHIRP / LAROCHE (Ref. No. 1113086)
Bale opener OMNI, SCHIRP double cylinder opener, opening cylinder
blending mixing feeder conveyor, LAROCHE feeding conveyor, LAROCHE feeding
tower
LAROCHE First, saw wire DAMGAARD, LINDEMANN carrousel press
1 pc. fine opener TRUTZSCHLER (Ref. No. 1122911)
2 pcs. bale openers TRUTZSCHLER KBZ (Ref. No. 1122910)
1 pc. fine opener TRÜTZSCHLER SMPR (Ref. No. 1122171), with Kirschner
1 pc. fibre compactor LTG (Ref. No. 1302150)
1 pc. cyclones (Ref. No. 1302151)
1 pc. 8-step-blender TRÜTZSCHLER MPM8 (Ref. No. 1132149)
1 pc. refrigerated dryer WORTHINGTON (Ref. No. 7132965)
1 pc. shredding machine (Ref. No. 1112964)
1 pc. friction spinning machine FEHRER DREF II FT (Ref. No. 3163331)
1 pc. flat printing machine STAMPERIA EMILIANA (Ref. No. 7171117)
1 pc. tearing line LAROCHE OLYMPIC (Ref. No. 1113013)
2 pcs. needle looms ASSELIN DOWNSTROKE + UPSTROKE (Ref. No. 2151406)
1 pc. DOWNSTROKE needle loom ASSELIN 122, single board, 2.850 needles/m,
infeed rollers with f
1 pc. UPSTROKE needle loom ASSELIN 246, single board, 2.850 needles/m
1 pc. complete baby diaper production line MODO (Ref. No. 2123032)
suitable for sizes MIDI - MAXI - MAXI PLUS - JUNIOR
1 pc. tearing line MASIAS / MARGASA (Ref. No. 1112501)
1 pc. carpet back coating line (Ref. No. 7142355)
1 pc. pit press FAES (Ref. No. 1152526), suitable for bale 1 qbm of 400
kgs
1 pc. tearing line (Ref. No. 1112500), consisting of:
1 "Masias" totally automatic mixing and mixing equipment,
capacity 6.000 Kgs. With rotative distribution with panel and pneumatic
transport.
1 "Masias" automatic hopper feeder, model 2C/IB-V 900 for
automatic feeding to the shredder.
1 "Margasa" shredder. Model AM, 1000 mm. width - 5 cylinders,
with independent fans, PIV independent return system to feeding,
mechanical speed variators, CO2 fire extinguishers, totally automatic
electrical panel equipped with electronic chambers for start-up of engines,
and control of consumptions, temperature, etc., 3 spare cylinders.
1 "Faes" automatic press with accumulator for bales of 1 cubic
meter and 300 Kgs. Weight of shreaded material
1 pc. random velour needle punch machine DILO DI-LOUR II S 25 (Ref. No.
2213075)
consisting of 3 sections: feed in, main body machine, feed out cleaning
system
four needle boards to fit machine 2.500 mm wide and 200 mm deep filled
with needles
1 pc. heat setting machine HOERAUF SUESSEN GKK (Ref. No. 8303247)
36 threads with GILBOS winder type TD6S made in 1997
1 pc. quilting machine MECA TECHNA (Ref. No. 5153197), lock stitch
technology
1 pc. pre needle loom FEHRER NL 9 S (Ref. No. 2152912)
with compressive batt feeder with fingers, single board down stroke
machine
1 pc. Mixmaster TEMAFA Mixmaster (Ref. No. 1132748)
1 pc. stitchbonding machine MALIMO MALIWATT 14010 (Ref. No. 5162399)
1 pc. fine opener TEMAFA (Ref. No. 1123289)
5 pcs. twisting machines SAURER ALLMA TM 140 S (Ref. No. 3172395)
1 pc. washing machine TONELLO G1-300 HS (Ref. No. 7222214)
1 pc. carding machine HERGETH HOLLINGSWORTH type AL 4 (Ref. No. 2133218)
1 pc. cross lapper AUTEFA C 70 (Ref. No. 2143219), entry from carding
machine: 2.500 mm
1 pc. bandknife cutting machine KURIS TexKnife 376 F (Ref. No. 5141019)
1 pc. double doffing cards WISE INDUSTRIES (Ref. No. 2133033)
1 pc. tufting machine scroll two pile height COBBLE SCROLL 120 CLUTCHES
(Ref. No. 6133258)
1/8" scroll two pile height tufting machine, 120 clutches, Lp 1
system with drum
3 pcs. winding machines KARL MAYER EVILO RC 10 R2 U EW (Ref. No. 3192905)
1 machine is with 1 winding head type RC 10 R1 U
2 pcs. winding machines for remaining yarns MEYER (Ref. No. 3193220)
suitable for BCF yarns, 1 machine with 2 heads, 1 machine with 1 head
1 pc. winding machine MAYER RC 10 NG (Ref. No. 3192198)
4 automatic doffing, double exhausting, automatical splicers type Mas
2,
yarn cleaner LOEPFE Yarnmaster TJ 785, electronical length measurement
each via PLC
anti-ribbon drive, 2 exhaustors JACOBI
1 pc. tufting machine ITS Challenger (Ref. No. 6133064), 1/10" loop
pile
staggered needle bar, double deck creel with 1980 x 2 spindles
only available together with: 1 tufting machine TUFTCO, 1/4" loop
pile
1 pc. Garnett machine 24/30 (Ref. No. 2132849), offer includes a weigh pan
6 pcs. draw frames SCHUBERT + SALZER (Ingolstadt) RSB + SB 51 (Ref. No.
3141811)
1 pc. sieve machine for hemp production and similar ALLGAIER-WERKE GmbH
(Ref. No. 8323283)
1 pc. knoting machine USTER UMM (Ref. No. 4302417) USTER UMM type
1 pc. spinning machine FEHRER DREF III (Ref. No. 316332)
2 pcs. needle looms FEHRER NL 2000 S and NL 2000 RS (Ref. No. 2163221)
1 lot of cutting machines (Ref. No. 5143243) and sheeters, slitters /
rewinders
1 pc. swivel arm cutting press SANDT (Ref. No. 5201957), 18 to pressure
14 pcs. swivel arm cutting presses USM RA (Ref. No. 5201271), 18 tons
pressure
16 pcs. swivel arm cutting presses, MACHINAS KLEIN (Ref. No. 5201272), 20
tons
3 pcs. swivel arm cutting presses GSB 3 (Ref. No. 5201273), 18 tons
2 pcs. swivel arm cutting presses SANDT (Ref. No. 5201274), 16 tons
pressure
1 pc. swivel arm cutting press KS (Ref. No. 5201354), table size 1000 x
500
1 pc. large size cutting press SANDT 614 (Ref. No. 5202578), 250 tons
pressure
1 pc. swivel arm cutting press (Ref. No. 5202625), with sliding table
1 pc. Continue dyeing line for carpet FLEISSNER/KÜSTERS (Ref. No.
7233094)
without dryer, including preparation, including washing machine, including
steamer
1 pc. nonwoven line (Ref. No. 2113068), consisting of:
1. Needle loom FEHRER NL 21, 2. Needle loom FEHRER NL 21,
Bale Opener DELL'ORCO VILLANI DV, Carding machine SPINNBAU + HERGETH
Cross lapper AUTEFA CL2000, Cutting and rolling unit, Material Accumulator
Material feeding bin HERGETH HOLLINGSWORTH FS/5, Thermofixing machine
Vibrating feeder HERGETH HOLLINGSWORTH
1 pc. nonwoven Line (Ref. No. 2113069), consisting of:
1. Needle loom DILO OD-II, working width: 6.000 mm,
2. Needle loom FEHRER NL 2000/S, working width: 5.500 mm, 3. Needle loom FEHRER NL 2000/RS, working width: 5.500
mm
Bale opener TEMAFA,
Carding machine OCTIR,
Cross lapper AUTEFA CL4002,
Cutting and rolling
4 pcs. knoting machines KNOTEX type ZS 5014 B2 + ZS 4307 B02 (Ref. No.
4302416)
2 Knotcontrol TSE, all machines incl. knoting frame
1 pc. sectional warping machine BENNINGER ZASE (Ref. No. 4172890)
beaming device for 800 mm discs, also available: Warping creel Elchler,
660 positions
1 pc. band cutting machine SISTIG BS-K 650 (Ref. No. 5143104)
1 pc. roll cutting machine (Ref. No. 5143160)
1 pc. cross cutting machine manufactured by STRECKER type KC (Ref. No.
5143159)
6 pcs. weaving machines PICANOL OMNI 380 (Ref. No. 4122900)
5 pcs. bobbin winders MAYER RCR1U EW (Ref. No. 3192898)
1 pc. carding willow TEMAFA 3002 (Ref. No. 1122313),
eventually including hopper feeder
2 pcs. spinning machines FEHRER DREF II (Ref. No. 3162476)
2 pcs. weaving machines GUESKEN GMV 90 (Ref. No. 4163089)
1 pc. cutter GERBER DCS 3500 (Ref. No. 5143251)
1 pc. knitting machine SHIMA SEIKI SES 236 FF J7 (Ref. No. 8132747)
1 pc. cross lapper HERGETH/HOLLINGSWORTH PALT (Ref. No. 2143073)
1 pc. rashel machine MAYER type DR 8 (Ref. No. 8142495)
1 pc. sacking device ESSE GI (Ref. No. 5193215)
suitable for bag filling (packing),
formerly used for filling of hemp
1 pc. printing machine BUSER ROTAMAC4E (Ref. No. 7172642)
washing unit for rakel RR/B 3200 made in 1990,
cylinder washing machine 4 positions,
photograph unit with HARLACHER type H292 3200 mm,
spare parts, 2000 printing cylinder
1 pc. cutting section (Ref. No. 5142499)
- 1 pc. PIERRET automatic robot for bales opening and feeding the first
cutting machine
- 3 pcs. MARGASA rotative cutters double cut, the first of them with entry
rollers
- 1 pc. electrical panel for controlling all the cutting section,
- 1 pc. fan of 7,5 kgs
1 pc. airlay carding machine SCHIRP type 61S/70 (Ref. No. 2133016)
Random Fleece Maker type 70,
incl. 2 TEMAFA Baltromix
1 pc. tufting machine SINGER (Ref. No. 6132455)
PIV driven yarn and backing feed
4 yarnfeed rollers, jutemover at front and back with external cam, individual reed fingers
1 pc. multi needle quilting machine STUTZNAECKER MAMMUT (Ref. No. 5152889)
1 pc. 96 inch wide cross cut unit with pneumatic traverse,
pad run out conveyor, pad folder and automatic stacker with ac variable
speed drives
1 x 30 Kva 600 V to 120/208 V transformer for quilter, crosscut and folder
1 pc. weft straightner MENSCHNER CORREIFIX (Ref. No. 8302470)
1 pc. shearing machine PARKS + WOOLSON (Ref. No. 5242471)
1 pc. steaming machine SPERROTO RIMAR Model STABILLA (Ref. No. 7182472)
4 pcs. twin (double sided) bale presses JAMES HUNTER (Ref. No. 1152535)
1 pc. mending gun (Ref. No. 6141454), NEVER USED
1 pc. raising and shearing line MARIO COSTA (Ref. No. 7212469)
2 raising machines and 3 shearing machine, approx. 7000 working hours
1 pc. fulling and scouring machine MAT DI BERTOLI TOURBOMAT 4-Seasons
2-C-SM/600 (Ref. No. 8302537),
with Sedomat controls used for fulling and scouring pure wool and wool
blends.
1 pc. needle loom DILO SD-25 (Ref. No. 2212564)
suitable for boucles, velours and various patterns, unwinder AWZ 25,
winder JWS25
hydraulic system, with control cabinet and panel,
sound absorbing cabin
3 pcs. batching unit type winder SCHREIER (Ref. No. 5113223)
1 pc. cylinder dryer for thermo bonding of nonwovens WUMAG (Ref.
No. 7132946)
oil and steam heated drums,
stack of 8 hot-oil cans with enclosure, drive system,
1 pc. squeegee KÜSTERS 73 (Ref. No. 7111629)
The KÜSTERS squeegee, named 3-roller-water-calander, is consisting of the
squeegee itself with a pneumatically lowerable tray, spraying pipes for
washing the material and hydraulic device.
2 pcs. case packers ETT (Ref. No. 5193061)
- Case Packer ETT made in 1999, for tubs and refill
type A-146, American Case, Shelfable Case
- Case Packer ETT 2nd line made in 2001 (refill only)
incl. spare indexing conveyor and format tools for diff. products, type
A-146, American Case, Shelfable Case
1 pc. palletizer STREHMA Modell A-7000 (Ref. No. 5193112)
1 pc. strapping machine BECK (Ref. No. 5192282)
1 pc. closing machine for carton boxes (Ref. No. 5192284)
1 various conveyor belts (Flexling belts) (Ref. No. 8302285)
1 pc. PP staple fiber line FARE (Ref. No. 3233210)
suitable for PP and Bico, complete line including cutters and baling press
2 pcs. cutting machines ROLANDO / PIERRET (Ref. No. 5143099)
1.) 1 Rotary cutter ROLANDO RL 10, 500 mm working width
2.) 1 Cutting machine PIERRET
1 pc. needle loom DILO SD-25 (Ref. No. 2212565)
1 pc. Rando Webber (Ref. No. 2223157)
24 pcs. weaving looms STB 330 (Ref. No. 4123007)
1 pc. stenter frame MONFORTS (Ref. No. 7122940)
1 pc. quilting machine DAHMEN (Ref. No. 5152816),
incl. longit. and cross cutting machine
1 pc. horizontal baler Continental Air Systems type Fibra Baler (Ref. No.
1152975)
2 pcs. weaving machines PIGNONE FAST (Ref. No. 4122977)
1 pc. horizontal baler LUWA BAHNSON 3030-5035 TX Closed End Baler (Ref.
No. 1152976)
1 lot of various circular knitting machines (Ref. No. 8133017)
1 pc. velour needle loom DILO DI-LOUR (Ref. No. 2212618)
8 pcs. warp beams (Ref. No. 4303028)
1 pc. needle loom DILO (Ref. No. 2153087)
1 pc. needle loom DILO (Ref. No. 2153090)
1 pc. needle loom DILO (Ref. No. 2153091)
1 pc. spare motor for FEHRER NL 21 needle loom ELEKTRA-FAURNDAU (Ref. No.
8323037)
1 pc. laboratory needle loom HUNTER (Ref. No. 220148-N)
1 pc. tufting machine COBBLE II (Ref. No. 6132456)
1/4" gauge straight with RH needles, PIV driven yarn and backing feed
2 motors, 4 yarnfeed rollers (diam. 4"), liftbar, mainshaft = 2"
diameter
jutemover at front and back with external cam, individual reed fingers
1 pc. needle loom DILO type UC-II-30 (Ref. No. 2162428)
double board upstroke machine, needling from bottom to top
heavy duty needle loom for heavy products, length of needle board 3100 mm
Spare parts for FEHRER NL 21 type needle loom (Ref. No.
8322966)
a) 1 main drive, b) 1 gear, c) 2 compensating axle
d) 1 box smaller parts such like bearings and clutches
2 pcs. waste tearing lines (Ref. No. 1112611)
consisting of: Cutting, Pickers, Cleaning,
Each line has;
10 foot willow with magnetic trash separators,
Trash screw, fan and collector,
Input and output material handling fans, Bit reject cyclone,
Bale press, Floor scale
1 pc. weaving machine VAN DE WIELE (Ref. No. 4162796)
with Takemura System
reed 350 ALD61 modified to ASR61
1 pc. weaving loom VAN DE WIELE (Ref. No. 4162797)
with TAKEMURA system,
reed ALX modified to ALD61, modified to ASR61
1 pc. weaving machine VAN DE WIELE (Ref. No. 4162798)
with TAKEMURA system
reed 350 ALD61 modified to ASR61
1 pc. laboratory printing line for dyeing and printing carpets MITTER /
KÜSTERS (Ref. No. 717939-N)
- 2-roller-foulard,
- printing station MITTER,
- horizontal steaming line,
- fluid dyer
- vertical steamer,
- washing and exhausting device with spraying bars
and vacuum hydroextraction
1 pc. nonwoven Line TATHAM/ASSELIN/BYWATER (Ref. No. 2112265)
Usedtextile Machinery Dealer - Used nonwoven / textile Machinery Dealers
Top of Page
Second-hand nonwoven machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch
english
francais espanol
nederlands
italiano
svenska suomi slovenski
cestina hrvatski