Coating machine

Coating machines second-hand | Lamination machines | Carpet back coating lines | Powder coating | Paste dot | Flat bed | Flame lamination

1 pc. backing line for artificial grass (Ref. No. 7148700).
The line is a carpet back coating line that has been adapted over the
years to process artificial grass. The offer is composed of: 
- J-Box.
- Lick roll for latex.
- 2 pcs. gas fired infrared heaters PROTECTOR.
- Oven with 4 sections. Originally 3 sections with 4th section purchased
  new from SELLERS in approx. 2015.
- Perforating station.
- Accumulator.
- Roll-up unit. 

1 pc. thermoplastic adhesive laminating machine CAVITEC /
SANTEX RIMAR AG type Cavimelt (Ref. No. 7148558).
2200 mm working width, year of construction 1999.
Vmin < 10 m/min. Vmax ca. 50 m/min. P: 153 kW.
With edge trimming and middle cut.

1 pc. vertical coating line ISOTEX (Ref. No. 7148433).
Year of construction 2006, second-hand. The offer includes: 
1.) Vertical coating unit SPALM-VERT.
2.) Vertical dryer IR TERM-VERT-IR.
3.) Cooling RAFF. 
All machines are made in 2006. 

1 pc. Hotmelt coating line NORDSON Meltex (Ref. No. 7148424).
380 mm working width, year of construction 1995, second-hand.
Application speed max. 300 m/min.
Max. speed 400 m/min.
Application quantity max. 5 grams/sqm.
2 unwinder up to 1000 mm diameter.
1 re-winder up to 1200 mm diameter. 
A MELTEX glue applicator is available as a separate item. 
The machine can also be used as a winder/re-winder machine.

2 pcs. machines of a hotmelt coating system NORDSON Meltex
(Ref. No. 7148423).
The offer is composed of:
1 pc. application head NORDSON type 45-07.
1 pc. melting unit NORDSON MX4411. 

1 pc. nonwoven impregnation line (Ref. No. 7148420).
2500 mm working width, year of construction 2004.
The line is suitable for the following purposes: 
1. Nonwovens thermobonding due to the high efficiency through air dryer.
2. Impregnation of resin to nonwovens for shoe industry.
3. Impregnation of resin to nonwovens for automotive industry.
4. Impregnation of resin to technical textiles nonwovens as filters and
other applications. 
The weights of the felts that was used to impregnate was from 100 to
500 GSM. 
The add-on resin depend of the solid content number as fillers used on
the formula and the application. 
Line speed up to 25 m/min, depending on the product. 
The line is in a perfect running condition and is consisting of the following
- Unwinder.
- Accumulator for 30 meters.
- Liquid and foam foulard impregnation system.
- Perforated drum through air dryer. The dryer is gas-heated.
  The diameter is 2200 mm. The gas burners are made by WEISHAUPT.
  The transport belt is metallic.
- Accumulator for 30 meters.
- Cross cutter with 3 longitudinal slitters.
- Roll winder.
- Control board. 

1 pc. lamination line with calender KLIEVERIK LFC 131/2000
(Ref. No. 7148361). 1800 mm max. material width.
Max. temperature: 240°C. Mechanical speed: 1 - 40 m/min. 
Speed at a contact time of 4 seconds: 29,3 m/min.
Speed at a contact time of 15 seconds: 7,8 m/min.
The line is composed of: 
1A) Applicator for powder.
2000 mm working width. 2200 mm roller width.
Powder particle size: 45 - 425 my.
Content of the powder storage: 140 l/m.
Max. application quantity: 2000 grams/min over the width each meter.
At the speed of 50 meter per minute the max. application is 40 grams
per square meter.
Optical powder niveau indicator. Scatterer roller with AC drive.
Brush included. Also with ionization bar to prevent electrostatic charge.
Suitable for powders Co-PES, C0-PA, HDPE and NDPE as well as EVA and
PP powder. 
1B) Frame for powder applicator. 
1C) Infra red unit, 600 mm, to prepare the powder. 
2) Lamination calender LFC 131/2000.
2000 mm roller width. Max. working width 1800 mm.
Drum diameter 760 mm. Mechanical speed 1 - 50 m/min.
The cylinder is heated by electrically heated thermal oil. 

1 pc. back coating line for carpets and artificial grass CAMPEN
(Ref. No. 7148356). 5000 mm working width, year of construction 2008.
The stenter frame is suitable from 3500 to 5000 mm.
The coating line is composed of:
- Unwinding table.
- Buffer storage.
- Preparation to install a steamer.
- SBR rakel coating.
- Foam table prepared, but never taken into operation.
- Two more drying fields could be installed.
- Roller for drainage holes.
- Buffer storage.
- Inspection table.
- Winder.
- Lay down. 

1 pc. lamination line (Ref. No. 7148286).
2200 mm working width, year of construction 2013.
The line is composed of:
1.) Unwinder with pre heat unit KRÖGEL.
2.) neXcal compact thermobonding ANDRITZ.
3.) Roller application system LACOM.
4.) Offset printing unit for one colour EKS.
5.) Automatic turret winder PSA WINDERWORKS.
With inline cutter AUTOWOVEN.
6.) Packing line JÜRGENS.
7.) Thermo oil mixing unit NESS.
All components are made in 2013. 

1 pc. finishing line (Ref. No. 7148317).
2700 mm working width, year of construction not known, used.
Previously used for glass decoration fabric.
The line is composed of:
- Unwinder.
- Accumulator.
- Brake device.
- Pre dryer (electro infra red).
- Main dryer (steam heated drying cylinders).
- Cutting unit.
- Inspection machine.
- Accumulator.
- Winder. 

1 pc. interlinings coating line SCHAETTI (Ref. No. 7148229).
Year of construction 1980, second-hand.
The start up of the line was in 1982. 
The line is suitable for coating a wide range of interlining fabrics in
different methods, e.g. dots, brush, paste and pressing different fabrics
together. The scope of supply includes:
1. Roll frame.
2. Brush and scatter unit to apply coating material.
3. Dots-like scattering unit to apply coating material.
4. Oven, 2 meters long, 7 elements.
5. Hard pressing unit and roll up.
6. Control unit for the entire process, temperature, speed etc.
7. Accessories including compressor installation. 
Electric requirements: 3 phase, 60 A. 

1 pc. Hot melt installation MELTEX (Ref. No. 7148225).
1300 mm max. working width, year of construction 1993, second-hand.
The line is still erected, but stopped from production approx. 2006. 
The unit is composed of:
- Unwinder, tensile frame and winder.
  Some electrical parts of the winder are missing.
- Tank for glue melting. 

1 pc. carpet back coating line for Latex application EAGLE
(Ref. No. 7147976). 1150 mm to 2250 mm working width.
Year of construction 2004. 2 application places.
1 smooth and 1 embossed calender for design.
The machine is steam heated. 
The size of the latex machine is 60 meters in length and 5 meters in
width. The absorption power is 100 kW. 

1 pc. coating line ISOTEX VTX.5.P2 (Ref. No. 7147788).
1600 mm working width, year of construction 1992.
The total number of working hours is relatively low. The line has been
used for a few months only and is in storage since then.
The total length of the line is 18 m. The total width is 3400 mm.
The line is consisting of:
Winder / unwinder model AV, SV.
Tensioner ST.T.
Rakel (knife) model KR.
Cooling unit model RAN3.
Dryer model VTX5, 5 sections each 2 m. 
Electric: 24,5 kW. Heated by steam 0,8 mPa. Steam consumption
approx. 400 kg/h. The dryer is prepared for heating by oil. 
The total weight is approx. 11 tons. 

1 pc. acryl foam lamination line WINDMÖLLER + HÖLSCHER KG / BECK
(Ref. No. 7147752).
550 mm working width, year of construction 1991 / 1992 / 1993, used.
The line is designed for production of paper wall coverings laminated with
acryl foam and is consisting of: 
- Lamination unit type LAMIPRINT, year of construction 1993. 
- Roll collection and packing unit HUGO BECK, type BP 700.
  Year of construction 1991. 
- HUGO BECK unit type SL 712, year of construction 1991. 
- Box packer to pack rolls into a box.
  KARTOMAT-600. Year of construction 1992. 
Output approx. 300 rolls per hour.
Annual capacity approx. 1,8 million rolls per year. 
The line is designed to laminate two layers of paper by glue lamination.
Additional possible processes are: Embossing in synchronization with the
printed pattern, packing into the card boxes and confection. 
The line has one station for printing / acryl coating and an airknife to cover
paper with water-resistant paint. 
The line was in operation at a 5 colour HOLWEG printer dedicated for
paper wall covers. 

1 pc. powder lamination machine VILLARS (Ref. No. 7142971).
1800 mm roller width, year of construction approx. 1992/93.
1.600 mm material width.
With powder scatterer and 3.000 mm infrared heating field.
With calender.
With double band cooling press.
With line control (turning frame).
With 4.000 mm accumulator.
With batching unit type winder.
With cross cutter.
With edge trimmer left and right side.
With roll take-off.
With 2 large accumulators on entry.
With 2 unwinders on entry.
With cooling device and water tank.

1 pc. foam mixer HANSA (Ref. No. 7147106).
Year of construction 1985. 

1 pc. licking roller MENZEL (Ref. No. 7146795).
2700 mm working width, year of construction 1992.
Completely made from stainless steel.

1 pc. rotor spraying coating system CONSULTEX (USA)
(Ref. No. 7146408).
The line originally was used to apply a carpet backing in the weight range
of approx. 30 to 100 gr/sqm. The line has been used for trials only and is
now available for sale because requirements of customer had changed.
The line is specially well for flame retardant application, odor application in
nonwovens and also resin coating, but then with 50 % solids and low
amount due to the limited dryer capacity.
With MENZEL IR 6 zones heaters.
The line is consisting of:
CONSULTEX spray applicator IQ 141:
- Max. spray width 2400 mm.
- Max spray rate per rotor carrier 3300 ml/meter/minute.
- Electrical 440 V /  3 phases /  60 Hz.
- Compressed air 5 bar = 73 psi.
1 Mounting Frame and Dryer for applicator:
- Face width 2600 mm.
- Product width 2400 mm.
- Product: Nonwoven 300 gsm - 700 gsm.
- Operating Speed: up to 25 meters/min.
- Electrical characteristics: 440 V / 3 phases / 60 Hz.

1 pc. licking machine MENZEL (Ref. No. 7145909).
2700 mm working width, year of construction 1992.
Made from stainless steel.

1 pc. coating machine RIMSLOW PRECOAT W 1600 (Ref. No. 7145114).
Year of construction 2003.
The machine is suitable for preparing textiles with inkjet coating for digital
direct print or to give a flame retardant coating to textiles.


Extrusion coating lines

Used textile dryers


Back to top


Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany / Europe. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand coating machines, lamination machinery, carpet back coating lines, powder coating machines, paste dot coating machinery and used flame lamination lines. Your offers and enquiries will be appreciated.


© Elisabeth Aderhold-Marleaux Mail to