Used textile machines for the textile industry

Textile machines second hand | Further equipment used in textile industry

1 pc. finishing machine MAGEBA type Liliput (Ref. No. 8308680).
Year of construction 1981, second-hand.
The finishing machine has a gas heating and is ready to work. 

3 pcs. ultrasonic flatbed welding machines PFAFF / NUCLEUS
(Ref. No. 8308667). Year of construction 2016 + 2017, second-hand.
2 machines are made by PFAFF.
1 machine is made by NUCLEUS. 

1 pc. universal autoclave SCHOLZ (Ref. No. 7238596).
Year of construction 1996, used.
2000 mm diameter. 6100 mm feeding length. 

1 pc. air compressor KAESER AS 44 (Ref. No. 8308578).
Capacity approx. 3300 qbm/h. 10 bar. 
With air pressure cooling dryer type TC 44 with ECO-Drain.
With oil-water separating system type Aquamat 4. 

1 pc. jacquard fabric finisher (Ref. No. 8308556).
The SteamJet can process up to 65 m of fabric per cycle.
Fast steam times. All stainless construction.
No water hookup required. Consistent steaming results.
Electronic time and temperature controls. 

1 pc. fusing machine KANNEGIESSER Typ CC 500 (Ref. No. 7177883).
500 mm working width, year of construction approx. 2000.
With infeed table and with cooling table. 2 Teflon belts.
Max. temperature 200C.
Weight of the machine approx. 470 kg.

1 pc. decatizing machine SPEROTTO RIMAR Multidecat
(Ref. No. 7148443). Year of construction 1981, second-hand. 

1 pc. steaming table with integrated steam generator GHIDINI
type GB-MV/V (Ref. No. 8308410).
1800 mm ironing width. Ironing height: 900 mm. 

1 pc. steam boiler LOOS UL-4000 (Ref. No. 7138382).
Year of construction 1991, second-hand.
Weight of the boiler when empty: approx. 13,7 tons.
Filling: approx. 7200 liters. Steam capacity approx. 4000 kg/h.
Safety pressure: 16 bar. Average pressure: 10 bar. 
Burner details: The burner is manufactured by WEISHAUPT.
Type GL9/1, design TMD, year of construction 1991.
The capacity is 830 - 35000 kW. Gas type: N. 

1 pc. shrinking machine MONFORTS TOP TEX / W (Ref. No. 8308349).
2000 mm working width, year of construction 1989.
The rubber is in a good condition and still can be used.
Technical literature is available. 
The scope of supply comprises:
- 1 pc. Toptex /W.
- 1 pc. infeed side CALATOR / unwinder.
- 1 pc. exit side CALATOR. 

1 pc. crash machine (Ref. No. 8308219). 

1 pc. laying table KURIS / WASTEMA Shuttle IIC (Ref. No. 8307900).
2130 mm working width. Laying speed 100 m/min.
Max. height of layers: 180 mm. 
Accessories:
1 lifting unit KURIS C-350. Capacity 350 kg. 

1 pc. gauze bleaching line (Ref. No. 7157830).
Year of construction 1978, 1990, 1992, used equipment.
Capacity approx. 20000 meters bleached gauze of different density
(10/7, 12/8, 20/16, 28/16) in 4 hours. 
The line is composed of: 
- Rough gauge on perforated drums winding machine. SANTEX.
- Bleaching machine THIES, horizontal type.
- Crane for bleaching cylinder lifting. DEMAG.
- Unwinding machine SCHENK.
- Stenter frame dryer with foulard. TEXTIMA. 

2 pcs. ironing presses INDUPRESS UNIVERSALPRESSEN
(Ref. No. 8307558). Year of construction 2003.
Ironing presses for blazer and jackets for front part and shoulder parts.
1 machine type IPN-SC-03-12A-123.
Steam 5,5 bar, air 6,0 bar, 400 V, 50 Hz.
1 machine type IPT-SG-07-11A-112S. 400 V, 50 Hz, 6 bar. 

1 pc. foam carousel  type 138 (Ref. No. 8307481).
Year of construction 2002. The line is consisting of:
- 7000 mm carousel table (event. suitable for max. 20 tons, needs to
  be confirmed).
- 5 electric mould carriers.
- ABB robot IRB 6000.
- NORDSON glue equipment.
Kindly note: A PUR metering unit is not included. 

1 pc. washing machine WET-TEX (Ref. No. 7227374).
3200 mm max. width.
The machine is suitable for PES woven fabric of approx.
100 to 250 gr/sqm. The roller width is 3400 mm.
Production speed approx. 30 m/min in the average.
Technical speed: 2,5 - 50 m/min.
The operator's side is on the right. The drive side is on the left.
The water connection and the steam connection are on the left
from below. Energy requirement 116 kW. Voltage 400 Volt, 50 Hz.
Control voltage 230 V, AC, 24 V DC. Air pressure 6 bar clean.
Steam max. 4,5 bar. 

1 pc. finishing machine MAGEBA (Ref. No. 7117093).
400 mm working width, year of construction 2000.
The line is consisting of a foulard, a pre-dryer (methane infrared) and a
dryer (methane). The line has been used for Polyester before.
Various spare parts are available.

1 pc. finishing line for cotton MAGEBA  (Ref. No. 8307094)
200 mm width, year of construction 1983.
The line has been used for cotton. It consists of a foulard, a steaming unit
with an internal length of 60 meters (methane), 6 washing tanks and a
roll dryer. Spare parts are available. 

1 pc. welding machine (Ref. No. 8307071). 

1 pc. folding machine for nonwovens ELETTRO M. FLOGLI S.R.L.
model SAX 1200 (Ref. No. 8306510).
1200 mm working width, year of construction 2002, second-hand.
Suitable to fold nonwoven bed sheets and table cloth.
Capacity 13 pieces per minute.

1 pc. folding machine FORPLAST S.R.L. (Ref. No. 8306516).
200 mm working width, year of construction 2001.
Feeding of 2 rolls possible.
Speed approx. 25 folds per minute.
The machine is suitable to fold "false ceiling" material for the decoration
of building ceilings with non woven material.

1 pc. drafting unit NSC (Ref. No. 2304749).
Year of construction 2004. 4 trios, not moveable.
The working width is 3000 mm.

 

Used textile machines: Summary

 

Back to top

 

© Elisabeth Aderhold-Marleaux Mail to