Warping machines, second hand beaming machines, warper and warping frames
1 pc. warping machine BENNINGER SUPERTRONIC type 220 (Ref. No.
4175302)
year of construction 1987, second-hand
1 pc. band warping machine (conus warping machine) SCHLAFHORST DSB
(Ref. No. 4174305)
year of construction bought as second-hand in 1988, second-hand
drum 2200 + 400 mm conus
max. warp length 7000 meter
drum diameter 1000 mm, conus adjustable
1 pc. warping machine KARL MAYER DSC21 OPW (Ref. No. 4175237)
including 350 package holding units
1 pc. warping frame SUPERTRONIC (Ref. No. 4174919)
3000 mm working width, year of construction 1990, second-hand
without creel
1 pc. warping machine SCHLAFHORST DSB 55343 (Ref. No. 4174902)
1 pc. beaming machine headstock for PP yarn (Ref. No. 4174784)
creel total spindles 2500 ends
max. PP yarn tape width 5 mm
creel weight 4,5 kg/pc
working speed 10 - 160 m/min
with electronic control cabinet
2 pcs. conus warping machines HACOBA US-B-25 (Ref. No. 4174781)
2300 mm max. warping width, year of construction 1988
warping speed 600 m/min
conus angle 20 max
conus length 700
motor 5,5 kW
warping drum from profile sheet metal
mechanical band brake via drum on both sides
with 2 beaming machines
with 2 warping creels
1 pc. warp beamer KARL MAYER DSC 21 P (Ref. No. 4174489)
with Aggregate rollers WA21
Large Creel (built in house) fitted with 304 KFD type tensioners,
and droppers with end out detection
1 pc. sample warping machine HERGETH Type MS (Ref. No. 4174303)
200 pcs. sectional warp beams (Ref. No. 4304188)
21 inches x 21 inches, year of construction approx. 2008
very good condition
150 pcs. sectional warp beams (Ref. No. 4173990)
100 pcs. 21 inches x 21 inches, width 460 mm
50 pcs. 21 inches x 21 inches, width 480 mm
1 pc. warper HACOBA (Ref. No. 4173983)
4000 mm working width, year of construction 1979
barrell 3000 mm, used for PP tape
no creel behind, only warping head
still in running condition, used only as spare warping head before
1 pc. direct warper BENNINGER AG (Ref. No. 4173889)
1800 mm working width, year of construction 1973
roll diameter 800 mm
creel in V with 640 bobbins
bobbin's vertical distance 250 mm
bobbin's horizontal distance 250 mm
1 pc. warping machine BENNINGER ZDA/GCA (Ref. No. 4173608)
year of construction 1982
V creel for 720 cones, complete with 44 beams
2 pcs. warping machines SEGUI (Ref. No. 4172838)
year of construction 1997 + 1999 + 2000
1 Sectional Warping Machine model SW (year of construction 1999)
Equipped with beaming unit, leasing unit, warping unit
Equipped with variable speed DC motors at warping and beaming
Beam flange diameter: 1.000 mm
Safety system for beaming braking in case of off-time
Useful length 3.6 m
1 Creel COMSA for 832 cones system by trolleys.
This creel is model FKU and was constructed in 1997 and has two complete
games of trolleys.
Classic spindles, tensioners, electronic stop motion devices
1 Sectional Warping Machine model SW (year of construction 2000)
Equipped with beaming unit, leasing unit, warping unit
Equipped with variable speed DC motors at warping and beaming
Beam flange diameter: 1.000 mm
Safety system for beaming braking in case of off-time
Useful length 3.6 m
1 Creel for 1.200 cones rotatory System. This creel was constructed in
2000
Classic spindles, tensioners, electronic stop motion devices
1 pc. warping line TEXTIMA (Ref. No. 4171105)
year of construction 1985
consisting of:
1 winder TEXTIMA 4142, 1 roller device
1 yarn reed, 1 compl. creel with 320 places
total dimensions: 10,5 x 3,2 x 2,8 m LxWxH
Top of Page
Second-hand nonwoven machines and used textile equipment
Summary of 2nd-hand textile machine categories:
deutsch english
francais espanol
nederlands
italiano svenska
suomi slovenski
cestina hrvatski