Nonwoven production line

Nonwoven lines for special application | Second-hand nonwovens production and Non-woven converting lines

1 pc. thermobond nonwoven line BEMATIC / AUTOMATEX / FEHRER /
PROMONT (Ref. No. 2128438).
3600 mm final product width, year of construction 1984 - 2016.
The line allows production using two technologies: 
1. Vertical batt forming:
    With FEHRER K 12 airlay.
    150 - 1500 gsm.
    Max. capacity approx.:
    At 120 gsm = 450 kg/h. Above 200 gsm = 600 kg/h
2. Horizontal lapping:
    80 - 1500 gsm.
    Max. capacity approx.:
    At 80 gsm = 250 kg/h. 120 gsm = 350 kg/h. 200 gsm = 450 kg/h.
    Above 200 gsm = max. 600 kg/h.
The capacity at 6.7 dtex, 60 mm PES fibers, is in the range of 600 kg/h.
The line is composed of: 
- Feeding unit:
BEMATIC hopper feeder BCV. 3000 mm working width.
Construction year 2016. 
- Carding machine:
BEMATIC carding machine type HL 30 SS. 3000 mm working width.
Construction year 1984. 
- Cross lapper:
AUTOMATEX cross lapper FA 2000/T. Infeed 3000 mm.
Lay down width 4500 mm. 
- Airlay unit after the cross lapper or by-pass to the oven:
FEHRER K 12 airlay unit. 4000 mm width. Construction year 1990.
Oven PROMONT type 1PTB. 4000 mm working width.
One level with 5 heating zones of each 4 m length and 1 cooling zone
of 4 m length. 
- Cutting unit and winding:
7 longitudinal knives, cross cutting with tape knives.
Final product width: 3600 mm. 
The line has been modernized and is equipped with controls based on
controllers and touch panels. 
Electric: 400 V, 3 phases, 50 Hz. 

1 pc. airlay calender line (Ref. No. 2228352).
1600 mm working width, year of construction 1995/1996, second-hand.
The offer includes an airlay machine FEHRER V21R / K 21 in 1800 mm
working width, construction year 1995.
The line was producing up to 150 kg/h PET or PP.
The condition of the line is good. 

1 pc. nonwoven line (Ref. No. 2128300).
3500 mm working width. The line is composed of:
Carding machine OMEGA. 3500 mm width.
Can dryer WUMAG.
Cylinder Dryer FLEISSNER. 

1 pc. nonwoven line (Ref. No. 2128284).
3500 mm working width, year of construction mainly 2013.
The nonwoven line is versatile and suitable for thermobonding, chemical
bonding and air-through-bonding. The is composed of:
1.) Air filter CAVERION. Year of construction 2013.
2.) Bale opener TRÜTZSCHLER. Year of construction 2013.
3.) Feeding chutes. Year of construction 2013.
4.) Carding line. Year of construction 2013.
5.) Crane for carding line CARL STAHL. Year of construction 2013.
6.) Thermobond calender ANDRITZ GAPCON.
Year of construction 1992. With embossed roller as spare.
7.) Calender (cold), foam impregnation, foulard, can dryer type CAN DRY,
cylinder dryer. Manufacturer: SCHOTT + MEISSNER. Year 2013.
8.) Square meter measuring unit BST. Year of construction 2013.
9.) Mix station HANSA MIXER, type Eco-Mix 800. Year of construction 2013.
10.) Stainless steel silos WANG. Year of construction 2013.
11.) Automatic winder with longitudinal cutter PSA.
Year of construction 2013. Nonstop, with guillotine. 30 longit. knives.
12.) Thermo oil heater, heated by gas. Manufactured by NESS in 2013. 

1 pc. nonwoven line with thermobonding oven (Ref. No. 2127757).
1650 mm working width, year of construction 1960s.
The line is consisting of:
- 1 Picker blend line with beater mixer.
- 1 pc. 60" wide Garnett P+S.
- 1 pc. cross lapper.
- 1 pc. tacker.
- 1st needle needle loom HUNTER model 9.
- 2nd needle  loom HUNTER model 9.
- 3rd needle loom HUNTER model 9.
- 1 pc. needle loom DILO Di-LOFT.
- 4th needle loom HUNTER model 9.
- Oven.
- 1 pc. cross cutting machine.
- 1 pc. edge trimmer. 

1 pc. Nonwoven line (Ref. No. 2117025).
The line is consisting of:
1 pc. carding machine, 2500 mm working width.
1 pc. cross lapper HERGETH, 6000 mm working width.
1 pc. gas heated 3-floor oven MARIO BOMBI, 3400 mm width. 

1 pc. nonwoven line (Ref. No. 2126508).
Year of construction 1992 + 2007.
The line is suitable to open bales and to produce a web for
filling disposable bed sheets.
The line is consisting of: 
- Bale opening machine
Year of construction 1992. 
- Web forming machine BONINO.
Year of construction 2007. 
Width 1400 mm. Capacity 40 to 50 meters / min. 
- End section of carding machine TRAVERSI + ARMENTI.
Year of construction 2007.
Machine width 1500 mm.  
- Extractor fan. 

1 pc. nonwoven line for insulation material (Ref. No. 2125286).
1800 mm working width, year of construction 1999/2000, second-hand.
The line is specially designed for insulation material made from flax or
hemp but it can also work on wool. For the production with wool, it might
be recommended to optimize the one or the other card clothing.
Total capacity: approx. 300 kg raw material per hour.
The line is consisting of:
1. Feeding conveyor.
2. Fine opener.
3. Pneumatic fibre transport with metal separator.
4. Hopper feeder.
5. Carding machine SPINNBAU 1800 mm width, with pre tambour and
main tambour.
6. Spraying device.
7. Pre dryer.
8. Lapper (camelback type) with spraying unit.
9. Band dryer.
10. Cutting machine for plates.
11. Steam generator 100 kg/h.
Also: stirring tanks, blending tanks, heated, insulated, incl. conveyor and
dosage units, exhaust air and filter system, various spare parts. 

1 pc. complete line for disposable bed sheets (Ref. No. 2126507).
Year of construction: Please see individual positions.
The line is suitable to produce complete sets of disposable bedclothes
consisting of bed sheet, pillow case and quilts for wagon lit.
The scope of supply comprises the following: 
- Summer Kit bed sheet machine, complete with rewinder tower,
also used for manufacturing the pillow cases.
Brand name: FORPLAST, model PFS.
Year of construction 2000.
Max. width 1115 mm, max. length 2800 m.
Average capacity for pillow cases: 45 pieces per minute.
Average capacity for table cloth of 1000 x 1000 mm:
40 pieces per minute. 
- Folding machine for bed sheets SISCODATA type SMARTFF.
Year of construction 2000.
Capacity approx. 15 pcs. per minute. This is calculated for bed sheets of
1000 x 2000 mm with the before mentioned machine. 
- Wrapping machine SAC type SACMATIC 90
Year of construction 1996.
Machine width 500 mm, machine speed approx. 8 m/min.
This machine is on line with the before mentioned one.
- Vacuum for Kits
Manufactured by SAC, type BS90.
Year of construction 1996. 
- Machine to produce quilts and bed sheets MAGETRON
Year of construction 1991.
Max. width 1300 mm. Max. ot width: 2000 mm.
Output 8 pieces per minute. 
- Folding machine for bed sheets and quilts
Year of construction 1991. Machine width 1400 mm.
Max ot length 2100 mm.
Capacity 10 pieces per minute.
On line with the before mentioned machine. 
- 2 pcs. packing machines SAC
Year of construction 1989 + 2002.
Model SACMATIC 90 + BS 90.
Max. width 500 mm. Speed 9 pieces per minute.
On line with the before mentioned machine.


Nonwoven lines for general application 
Nonwoven lines for special application
Airlay lines
Spunlace lines
Spunbond lines


Back to top


Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany / Europe. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand nonwoven lines and non woven production lines. Your offers and enquiries will be appreciated. 


© Elisabeth Aderhold-Marleaux Mail to