Cutting machine for textile

Textile cutting machines second-hand | Slitters rewinders | Cross cutters | Roll cutting machines | Slitting machines | Band saws

1 pc. slitting machine KARL MAYER HPSM 75 (Ref. No. 5148695). 

1 pc. inline cutting machine and winder EDELMANN (Ref. No. 5148653).
3200 mm working width, year of construction 1990, used.
Roller width 3400 mm.
Winding shafts 4 x 3" and 4 x 6" resp. 4 x 76 mm and 4 x 152 mm.
Max. winding diameter 1200 mm. Max. speed 180 m/min.
Electrics 380 V, 50 Hz. Installed capacity 3 x 160 A (fuse 3 x 175 A).
With lifting table.

1 pc. longitudinal cutting machine MATTHYS (Ref. No. 5148651).
4000 mm working width. Construction year 2016.
"Scissor's Cut" principle.
Frame with turning rollers, 5 cutting blades. These are
separately driven by a pneumatic valve.
Scissor's cut. Height adjustment pneumatically.
The knives are approx. 180 mm diameter. The cutting
with is adjustable manually.
Smallest cutting width 300 mm.
Without side control.
With integrated tension roller.
With pressing roller on top, which presses the cloth
against the tension roller.
Light control in front of the cutters.
Cross cutting unit: Scissor's cut.
Max. cutting speed approx. 120 m/min. 

1 pc. stacking unit MATTHYS (Ref. No. 5148652).
Product specification:
Length of the pads: min. 611 mm, max. 900 mm.
Width of the pads: min. 700 mm, max. 3600 mm (max. 3 lines).
Thickness of the pads: min. 6 mm, max. 18 mm. 
Max. height of the stacks: 1500 mm (including the palette).
Modular conveyor for feeding in empty palettes and for releasing the
palettes out of the line.
Manually adjustable Stopp-Palette for correct positioning of the palettes.
Distance regulation for the palettes by photo cells. 
The pad stacker consists of:
- Conveyor.
  Working height approx. 2450 mm.
- Moveable frame beneath the conveyor.
- Modular conveyor with a lifting frame. 

1 pc. band knife cutting machine KURIS type RBM/R (Ref. No. 5148654).
Year of construction estimated to be in the 1980s.
With roll table.

1 pc. slitter/rewinder BIELLONI SAGE (Ref. No. 5148637).
1400 mm working width, year of construction 1990.
The unwinding shaft is suitable for rolls of up to 1000 mm diameter. 
With edge guidance, pressing units, roll lifter, scissor's cut, preparation for
squeezer blades, friction rings.
3" unwinding shaft with pneumatic rubber straps.
6" unwinding shaft with pneumatic rubber straps. 
The machine is suitable for adhesive tapes, foils, laminated materials,
paper, fabric, textiles, foams and other roll goods. 

1 pc. cutting and laying machine (Ref. No. 5148622).
1600 mm max. working width, year of construction 2014, used.
Automatic cutting and lay machine for textile and nonwoven.
Cutting length max. 4000 mm. 5 unwind stands.
Unwind stand with auto tension and unwind control.
Roll diameter max. 750 mm.
Cutting length set. Cutting repeat set. 
The motorized and automatic pull out unit is made by PHILIPS.
All the tables and the 5 roll unwind stand are with automatic out-feed and
tension control. 
In the previous production, the machine was used to cut medical products
at cleanroom conditions. 

1 pc. guillotine cutter (Ref. No. 5148521).
1040 mm working width.

1 pc. cutting machine ATLAS model A 200 V (Ref. No. 5148448).
2000 mm working width, year of construction 1963, reconditioned and
modernized 1985.
Cutting height 85 mm.
Cutting speed 30 strokes/min.
Machine weight 4500 kg. 

1 pc. turret winder with longitudinal and cross cutter: Please see
category: Roll winder.

1 pc. Zig-Zag cutting machine  (Ref. No. 5148247).
800 mm working width, year of construction ca. 1980, second-hand.
The machine is driven electrically and in good condition. 

1 pc. carpet cutting machine SCHWAB type TSM 400
(Ref. No. 5148244). Year of construction 1977. 

1 pc. cutting and finishing machine MAGETRON  (Ref. No. 5217983)
Year of construction 1998.
The machine is suitable to cut and finish mats such like bath carpets.
The width of the mats can be from 500 to 800 mm, and the length from
650 to 1850 mm. Capacity is depending on the sizes, but usually it is
around 400 pieces per hour. The machine can be operated by one person.
The machine can label the product automatically.
When using the machine for bath carpet, it can make mats only but also
one mat and 2 contoured mats for WC.
When a small black ink line is placed on the mats during tufting process,
the machine can cut automatically the placed mats because it can handle
the ink line as an impulse.

1 pc. cutting and finishing machine MAGETRON  (Ref. No. 5217984)
Year of construction 1988.
The machine is suitable to cut and finish 4 edges.
The mats can be from 500 to 900 mm in width and 800 to 1750 mm in
length. The machine can work approx. 280 pieces per hour, depending on
size. It can label the product automatically. 

1 pc. slitter DUSSENBERRY (Ref. No. 5147957).
1600 mm working width. The machine operates with air knives.

1 pc. cutting machine (Ref. No. 5147949).
With stacking unit made by TECHNIC ONE. 
The guillotine can cut material up to 2000 mm width. In the former
production, the cutting length was up to 2080 mm. The minimum cutting
length is 600 mm. The cutting speed is depending on the cutting length.
At 1450 mm cutting length, the machine was operated at a speed of
approx. 8,5 m/min. 
The max. stacking height incl. palette is approx. 1400 mm.

1 pc. longitudinal cutting machine HERZAU UND SCHMITT
(Ref. No. 5147779). 2900 mm working width, year of construction 1999.
Scissor's cut blades. 7 knives with counter knives installed.
Drive AC 0,55 kW. Without switch board. 

1 pc. carpet cutting machine SEYBOLD + Co. SM 50 L (Ref. No. 5144452).
5000 mm working width, year of construction 1981.
Roll up diameter 550 mm. Foil dispenser for 2 widths.
Core dispenser under the machine. Light for the cutting place.
With cross cutter and prepared to install a longit. cutting machine.
With unwind table suitable for 5000 mm wide rolls of 850 mm diameter.

1 pc. longitudinal cutting machine AUTEFA  (Ref. No. 5146685).
4000 mm working width, year of construction 1992.

1 pc. cross cutting machine AUTEFA type 132 (Ref. No. 5146686).
4000 mm working width, year of construction 1992. 

1 pc. cutting table BULLMER LMK 34 (Ref. No. 5147388).
3300 x 2200 mm, year of construction 1971.
Right now the machine is installed for making cross cuts.
The device for longitudinal cutting is stored in a ware house. 

1 pc. cutting machine PERFECTA type 801 (Ref. No. 5147325).
The machine is in a very good condition and the total number of
previous working hours is low. 

1 pc. cutting machine SCHIRP (Ref. No. 5146796).
2700 mm working width, year of construction 1992.
Squeezing cut with 9 circular blades of 300 mm diameter each.

1 pc. cutting machine SCHIRP  (Ref. No. 5146813)
2700 mm working width, year of construction 1992.
Squeezing cut with 9 circular blades of 300 mm diameter.

1 pc. band saw KM MACK type KS-AUV (Ref. No. 5146776). 

1 pc. slitter / rewinder for perforated nonwoven rolls NEW MEC
(Ref. No. 5146514). 1300 mm working width, year of construction 2001.
Roll diameter max. 1200 mm.
Speed 66 to 250 meters per minute, depending on materials.

1 pc. slitter/rewinder with packing machine EMIT S.R.L. ECLISSE-TLF
(Ref. No. 5146515). 2400 mm working width, year of construction 1998.
The machine is a slitter and rewinder, automatic machine with
pre-selection. It also includes a packing device.
Speed 210 meters per minute. 

1 pc. toggle cutter (guillotine) MOHR / FLEISSNER  (Ref. No. 5146065).
2400 mm cutting width, year of construction approx. 1980, second-hand.
In 1998 the hydraulic unit was completely renewed. Also the knife bar
system and the counter knife were re-newed. The knife bar system has a
down holder on both sides with knife-guidance, knife and counter knife
are as new. The hydraulic cylinder seal kit is re-newed as well as the
hydraulic oil.
The machine is still in production, functioning well, and can do a test run
during an inspection. The recommended square meter range is for
material up to 2500 gr/sqm. 

1 pc. guillotine cutting machine (Ref. No. 5146008).
2500 mm working width, year of construction unfortunately unknown.

1 pc. gauze rolls cutting machine MRSM 700-A (Ref. No. 5145769).
Year of construction 1985, second-hand.
The gauze roll cutter  is suitable to cut large gauze rolls into smaller rolls,
preparing them for further manufacturing on different kind of producing
machines to gauze swabs. The machine is equipped with an expansion
roller to pick up the gauze roll. This is locked in two bearing caps. The
drive is also fitted with a time delay starter resp. a special clutch for soft
start. A circular blade is rigidly mounted on a slide and is pressed to the
rotating gauze roll, assisted by a pneumatic cylinder. The cutting time,
depending on size and material, is about one minute.
Technical details:
- Max. width of material is 1.600 mm.
- Max. diameter of the gauze roll is 700 mm.
- Diameter of the carton core is 75 mm.
- Cutting operation automatically by a panel.
- Cutting operation manually by a hand wheel.
- Also suitable for a width of material up to 2.000 mm.
The machine has one large blade (circular blade) to cut the roll into stripes
of minimum 120 mm. The edge pieces can be disposed or be recycled by
feeding the material into a milling machine. Also, the widths can be
chosen and adjusted that way that also the edge pieces can be used -
this is mainly done in swab production with folded material edges.

1 pc. guillotine cutter (cross cutter) SCHIRP (Ref. No. 5145615).
4100 mm blade width, year of construction 1982, second-hand.
Pneumatic system.
Speed 3-30 m/min.
Incl. switch board and drives, knives included (upper and lower knives).
Reconditioned in 2007 as follows:
- All attrition parts were replaced.
- Drives and switch board new.
- Installation of security devices.
- New painting.
The machine is in very good condition and the number of working hours
after reconditioning is very low.

3 pcs. trim absorbers (Ref. No. 2302706).
All machines are including all tubes.
2 machines are with sound absorption box and one is without.

 

Cutting machines for shoulder pad production

Second-hand laser cutting machines and water-jet cutting machines
Second-hand guillotine and rotary cutters for textile waste recycling 
Second-hand roll cutting machines and used textile cutters

Second-hand tearing machines for textile waste recycling
Second-hand die cutters and clicking head cutting presses
Second-hand cutting machines for shoulder pads

 

You will find staple fiber cutters (if any for sale) in the Extrusion Lines category.

 

Back to top

 

Tornado Textilmaschinen GmbH Import-Export is used textile machinery dealer from Germany / Europe. We offer surplus nonwovens equipment and pre-owned textile machinery for sale. We buy and sell second-hand textile cutting machines, used slitter rewinder, cross cutters, roll cutting machines, used slitting machines and band saws. Your offers and enquiries will be appreciated.

 

© Elisabeth Aderhold-Marleaux Mail to